LATEST UPDATE – December 2018.
WE HAVE BEEN IN CONTACT WITH MICHAEL AND ZACHARY LYONS AT CENTEX. THEY ADVISE A NEW BATCH OF EDI+ ARE IN THE PROCESS OF BEING BUILT.
IF ALL GOES ACCORDING TO PLAN WE ARE HOPING TO HAVE STOCK AS A UK DISTRIBUTOR BY NOVEMBER.
WATCH THIS SPACE FOR FURTHER UPDATES.
As An Official Supplier In The UK For CENTEX PARANORMAL We Are Pleased To Be Able To Bring You The EDI+ PLUS
Centex EDI+ Multi-Meter And Temperature Data Logger
LED Readouts For EMF And Geophone Vibration Sensing
Digital LED Temperature Display (Fahrenheit And Celsius)
Integral SD Card Slot For Data Logging, Temperature, Pressure And Humidity.
Information Can Be Transferred To A Free Pc Based Application.
This Can Be Downloaded At https://Www.Centexparanormal.Com/Software
SD Card Not Included, A 2GB Card Is All You Will Require To Store Lots Of Data.
-Low frequency down to 10 hz
-Accurate milligauss readings from 0-12mg
-Indicator lights start dim response at approximately 1 milligauss and light sequentially at various strengths up to 12mg
-Speaker responds at approximately 3 milligauss
Vibration Sensor (Geophone)
-3 axis accelerometer with high pass filtered output to measure changes in acceleration in the +- 2g range
-Five indicator LEDs will set off in increasing intensity between 0.0244G – 0.122G
-Accurate to +-1 C from 0-65 C with 0.1 C resolution
-Alarms LEDs sensitive to +-0.1 F change in < 0.5 seconds
Data Logging & EDI-Graph App
All sensor data can be recorded to an SD card. Once per second the min/max values of each sensor is calculated and saved to a log file on the SD card
-Data is logged in .CSV format
-Application Requirements: PC with Windows
FREE SOFTWARE CAN BE DOWNLOADED FROM CENTEX
-Accurate to +- 3 %RH in 20 – 80 %RH range with 0.1%RH resolution
Alarm LEDs sensitive to +- 3%RH change in < 0.5 seconds
Accurate to +- 1.0hPa in 300 – 1000 hPa range with 0.1 hPa resolution
-Alarm LEDs sensitive to +- 0.15 hPa change in < 0.5 seconds