The Spirit Card Radio Receiver
The Spirit Card Radio Receiver With Electrostatic LED Indicator – Broad Wavelength Receiver for Maximising the Frequency and Channels for Spirits to Manifest.
The radio is for experimental purposes, best used in a clear outdoor open space with the antenna laid horizontally at its full extended length. Optimum results will be gained if used individually with headphones or when connected to a powerful amplified speaker. This device will require a lot of patience and time to get to grips with.
Sprit Cart Receiver instructions
The receiver requires either a 3volt external DC power supply connected to the terminal block , or a 3v cell on board battery for
portable operation . Button cells 2025 2035 2016 will all fit.
The phono socket can drive normal low impedance earphones for personal/potable operation, or drive a portal amplifier.
Reverse polarity protection is incorporated.
The receiver is provided with a 5 metres antenna which connects to the aerial pin with the crocodile clip provide. If a single station
is breaking through continuously, a shorter aerial will improve the selectivity.
The radio will work best away from computer generated noise.
During the afternoon and evening AM signals will become stronger and activity really hots up!
There is provision for a 3.5mm telescopic aerial to be connected via the 3.5mm aerial socket for increased EMF sensitivity.
Low frequencies and HF frequencies will be monitored, UHF and VHF Am signals if present will break through. Background
radiation from worldwide lightning strikes etc. will be heard over the radio signals.
There is no on/off switch, removing the earphone plug or amplifier from the receiver will switch the unit off.
The RF gain control is normally position to maximum , fully clockwise. When recording it may be useful to decrease the gain
slightly by turning the control anti-clockwise.
There is no tuning as such, signals will randomly be received.
Prototype Field Test of the HAC Radio Courtesy of Charlene / Paranormal Hauntings