Aeroflux Pressure And Temperature Deviation Alarm
Aeroflux Pressure And Temperature Deviation Alarm. Latest MKII updated December 2021.
This device measures deviation in temperature and pressure, clearly indicating changes via the visible colour coded LED and Audible Tones.
Using a phillips screwdriver, Unscrew the compartment on the base of the device, and insert a 9v battery. A good quality high capacity (over 600mah) battery is recommended. Push the battery cap lead back into the compartment (there is a hole at the back of the compartment for additional wire space) Screw the compartment closed, and you are good to go!
Place the AeroFlux Il on a stable surface then turn it on. The light will flash yellow whilst the AeroFlux conducts a calibration of the current environmental conditions. When the light is green, the AeroFlux Il is monitoring. The Thermal Anomaly mode can be switched on by the switch on the side of the unit with the Infraready logo. The light will flash Red when this mode is on, and Blue when it is switched off.
The AeroFlux Il will self calibrate after it detects an event, you don’t need to switch the unit off and on again.
“Green Mode” shows that the device is working, and actively monitoring the air pressure, comparing against previous readings to determine a pattern of fluctuation.
“Amber Alert” is linked to occurrences where the pressure has started to fluctuate to a pattern which predominately matched a large number of recorded events which could be classed as minor. i.e. small unexplained noised, small EMF spikes, slight changes in temperature.
“Purple Alert” is linked to a pattern which matched more pronounced recorded events, i.e. Loud noises, visual anomalies, Strong EMF spikes, REM Pod triggers.
“Red Alert” & “Blue Alert” display when the unit detects a hot or a cold spot respectively. It requires a 0.2 degree change over a period of 10 seconds to trigger these alerts.
This is an exciting device, as it is the result of a study started in 2014 into the environmental conductions present during paranormal events. Data loggers were used to record many environmental variables, each and every second. When an event was witnessed, the conditions at the time were linked to it. Over the course of hundreds of recorded paranormal events certain patterns were observed. One of these was related to air pressure, which routinely shows sign of fluctuation both just before and during other paranormal events occurring. For the past two years, this specific environmental variable has been included in investigation techniques and the exact periods and amount of fluctuation has been determined by experimentation.
Please note This device is part of the continued investigation into the paranormal and is an effort to share the findings of this study with other field researchers. The alerts are triggered by conditions which have been present during other recorded paranormal events, but are not guarantees that other events will occur! The purpose is to provide an early warning to investigators to pay close attention to what else might be going on.
Quick Lookup guide
The following is a quick guide to explain what each light colour means
Flashing yellow Initial device calibration. It is recording the environment before it starts monitoring changes.
Green The device is monitoring conditions, but hasn’t detected anything yet
Amber A pattern of air pressure fluctuation which indicates that there is a greater chance of paranormal events to occur
Purple Air pressure fluctuations which have a significant link to paranormal events occurring
Red The temperature has suddenly raised by 0.25 degrees. Slow increases in temperature do not set off the device.
Blue The temperature has suddenly dropped by 0.25 degrees.
Thanks to Andy at SCIRE for supplying this excellent device that combines two pieces of kit he builds, the TEMPERATURE ANOMALY DETECTOR (TAD) and AEROFLUX
The devices can be used simultaneously or independently
Credit to Awakening at the Paranormal for the footage showing the MKi Aeroflux in use. See more of their great investigation techniques at https://www.facebook.com/awakeningtheparanormal/