INFRARED PHOTOGRAPHY AND GHOST HUNTING SPECIALISTS.
Nightvision, full spectrum and infrared cameras and camcorders,
paranormal meters, trigger devices and IR illumination.

Wearable Wristband EVP Recorder and Camera

Sale!

£59.00 £49.00

Description

Wearable EVP Recorder and Daylight Camera

 

Brand new and high quality

High light-sensitive lens, low-light recording (not IR capable)

Support 1920*1080, 30 fps video recording

Small type and wearable design, simple and easy to carry and install

Built-in safe and high capacity polymer battery

Specification:

Strap size:110*118mm

Dial size:42*22*12mm

Weight:29g

Video resolution:1920*1080

Photographed pixels:2560*1440

Recording format:WAV

 

Video format:AVI

Charging voltage:DC-5V

Battery capacity:350mA

Image Format:JPG

Color:black

Package Included:

1x bracelet Camera

1x charge cable

1x manual

1x packing box

1x film

Notes:

Due to the difference between different monitors, the pictures may not reflect the actual color of the item.

Compare the detail sizes with yours, please allow 1-3cm error, due to manual measurement.

Please leaving a message before you give the bad feedback, if the products have some problems.

Thanks for your understandings.

 

K1 = UPPERMOST BUTTON

K2 = LOWERMOST BUTTON

 

1. Charging

There is a built-in a rechargeable lithium battery in this product. Please charge the battery with a charger before use. Two charging conditions are as follows:

1) When there has no TF cards in the vidicon, you can charge by connecting the charger with a USB data line. The red light flashes when charging.( Charging about 3 hours full of electricity)

2) When there has a TF card in the vidicon, it will start to record video automatically when charging in the state of shutdown. It stops recording when you press the K1 key, and it can also be charged.

2. Starting up

Insert a TF card in the vidicon, and press and hold the K1 key for about 2 seconds. The red and blue indicator lights are on . Then it enters into standby mode.

3. Recording

Press K1 key in the standby mode. The red and blue lights will go out after the red light flashes for three times. Meanwhile, start to record video.

When press the K1 key again, the red and blue lights will be on, and stop recording and return to the standby mode.

4. Taking pictures

Press the K2 key in the standby mode. The blue light will flash for three times, takes three pictures continuously, and then return to the standby mode.

5. Separate Sound Recording

Press and hold the K2 key for about one second in the standby mode. The red and blue lights will go out after the blue light flashes for three times. and start to record sound.

Press the K2 key again, the red and blue lights will be on, stop recording sound and return to the standby mode.

6. Record While Charging

Insert a TF card in vidicon, and connect it to the charger via a USB data line. The red and blue lights will go out after the red light flashes for three times. and then start to record video automatically. Keep the normal use of K1 and K2 keys. (This product doesn’t support loop video recording. Please change or clean the memory card when it is full.)

7. Shutdown

After the vidicon starts up, press and hold K1 key for about 2 seconds in any function mode and the red and blue lights will go out, which means it has been shut down. If the vidicon shuts down during the video or sound recording, the file recorded at the time will be saved automatically.

When the memory card doesn’t work or it cannot be detected, the vidicon will shut down after the blue light flashing for 5 times .

Notes: When the memory card of the vidicon is full, the vidicon will stop and shut down automatically. Please connect it to computer to delete some contents or change the memory card.

8. Computer Camera Function


This product can be used as a UVC computer camera. Connect it to computer, and press the power key after the computer reads the card. The “Mobile HDD” will turn to a “USB Video Equipment”. It can be used when you double click the “USB Video Equipment” (When insert a memory card).

When you do not insert a memory card, you can directly connect to the computer;

9. Time Modification and Setting Up

Insert a TF card in the apparatus,Boot, the memory card will automatically generate a “Time.txt” file connect to the computer, modify the TXT file inside the date and time “23:59:59 2015-01-01“, and then save the file.e, exit the hardware safely. Start up, and the setting-up of time will be finished.

VI. Specification Parameters

Items

Relevant Parameters

Video Format AVI
Video Coding M-JPEG
Video Resolution 1920*1080
Video Frame Rate 30fps
Physical Pixel 2560*1440
Picture Format JPG
Voice Format WAV
Media Player Software Built-in software of operation system or mainstream media player
System Windows me/2000/xp/2003/vista; WIN7 Mac os; Linux;
Battery Power 350mA
Charging Voltage DC-5V
Storage Support Micro SD (TF card) maximum 32GB

VII. Cautions

a) Usage occasion: please strictly obey the relevant national laws to use this product, it is forbidden to use it for any illegal purposes.

b) Battery: the working time of battery becomes shorter with the increase of using time. Please fully charge the battery before using after a long time unused.

c) File Security: the product is non-professional storage device, so it cannot ensure the integrity and security of internal storage file. Please backup your important files on computer or other storage devices in time.

d) Other Matters: the product belongs to precise electronic product. Please keep it away from strong shock and vibration. Do not use it in high-intensity magnetic field or strong electrical field.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Ghost Hunting Camcorders and Equipment

Partnership Links
Ghostly Goings On
soul reaper paranormal
https://www.spirithunters.co.uk/
catsinights
http://ukps.simdif.com
SIXT SENSES PARANORMAL HTTPS://WWW.SSPS.MX
white noise and whispers
eneterning the unknown paranormal group
brookes paranormal
haunted scotland
paranormal dead
Hidden Realm Paranormal Blog
Ghostly pursuits
DONT BE SCRAED PARANORMAL INVESTIGATIONS
g.p.i.s PARANORMAL
Dragonfly Paranormal
Slider